Products : Legacy Products : ADP15 Voltage and Current Input Digital Indicator and Controller

ADP15 Voltage and Current Input Digital Indicator and Controller

ADP15.

Features

  • Microprocessor based design
  • Full calibration & programming via keypad & communications import
  • Isolated inputs & outputs range AC & DC powering
  • 3 year guarantee
  • PID Control
  • Isolated Analogue Outputs
  • Fail safe alarm/relay outputs
  • 4½ digit high resolution
  • DC Voltages 20mV to 200V
  • DC Current 4-20mA
  • Peak hold

The ADP15 range of products is very versatile, accepting a wide range of different signal input types and ranges.

The ADP15 flexibility makes it the first choice for many control system designers. Supporting products like PC software, printers, and sensors, means most customers can deal with a single supplier.

Outputs include:- Analogue voltage and current, Industry standard digital communications, Relays, Printer Drive.
Options and Accessories include:-

Panel mounting via DIN rail mounting
Power supplies for 110/230VAC or 9-32VDC
Communications for Printer, PLC or PC  Software Options:- Power Factor Printers DP data only and TDP for real time/date.

The ADP15 can be supplied as part of a system, including many of the wide range of LCM Systems sensors and instrumentation. Please contact our technical department to discuss your application.

Specification

Input Type

Input Ranges

Order code

DC Voltage +/-200mV DCV2
  +/-20V DCV4
  +/-200V DCV5
DC Current 4-20mA (3.5mA to 20.5mA) DCA2E

Outputs

Details

Order code

0 to 10V   V4
4-20mA   A4

Other Information

Accuracy Typical ±0.08% of output, ± 0.08%FSD
Resolution As display resolution, max 15 bits
Calibration By 15-turn pre sets for gain and offset
Inversion By keypad value
Isolation ±130V RMS or DC max to analogue input or to any other port
Ranging Fully keypad scalable over desired display range
PID Power level, when selected = 12 bit resolution output

Communications Port

Details

Order code

RS485/232 RS485 - For up to 32 instruments on 1 bus, 4 wire
RS232 ­ printer or direct connection to 1 device, 3 wire
COM 1

Other Information

Baud rates 300, 600, 1200, 2400, 4800, 9600 (19200 MANTRABUS only)
Electrical isolation ±130V RMS or DC max to analogue input or any other port
Formats MODBUS RTU, MANTRABUS and printer output formats

Alarm/Control Outputs

Details

Order code

DPCO 1 relay on SP1 R2
SPCO 2 relays on SP1& 2 R3

Other Information

Relays 230V at 5A AC resistive
Isolation ±130V RMS
Keypad Programmable Hysteresis, Latching, Output Inversion, Delay Times,
PID values and options Time Proportioning.
16 relay option can be supplied on external DIN rail modules (10A SPCO), ask for ADP15-SP16

Power Supplies

Details

Order code

240 220V-230V AC 50-60Hz 10W 240
110 110V-120V AC 50-60Hz 10W 110
12 & 24V 9-32V DC 10W isolated 12/24

Mounting Type

Order code

Front Panel P
Din Rail Adaptor D

Communication Port CP Operation

All ADP15 display data can be accessed via the communications port along with relay, PID power and EEPROM status.
All ADP15 user configurable data can be changed including EEPROM enable/disable and relay reset (ADP15 address code cannot be changed).

Other Options & Accessories

One pass calibration
20mA PC Communications Interface (IF25)
VisualLink PC SCADA Software
Analogue Totaliser (Integrator)

Base ADP15

Input Filter Programmable to average up to 64 display updates.
Displays 7 segment LED 4.5 digit 10mm.3 x 3mm LED's 2 for relay status, 1 for program and hold indication.
Update Rate Up to 10 updates per seconds

Controls

4 membrane panel keys Scroll key to view/update parameter.
  Digit select key.
  Digit increment key.
  Reset key.
  Keypad disable by internal links behind front panel.
  Hold function by digit select key when in input mode.

Data Retention/Protection

Retention 10 years for set up values, minimum of 100,000 write cycle
  Protection of data and function(s) Watchdog timer giving repeat auto resets.
  Impending power detection and hold off.
  Keypad security and time out.

CE & Environmental

Storage temperature -20 to +70ºC
Operating temperature -10 to 50°C
Relative humidity 95% maximum non condensing
Safety/Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC

Physical

Case Dimensions DIN 72 x 72 x 163mm (excluding mounting terminal)
Case Material Grey Noryl, flame retardant
Weight 750 grams
Terminals 2.5mm, saddle field terminals
Accessibility All electronics removable through front panel leaving field wiring and case in situ.

Dimensions

adp15 drawing

Downloads

Click to download - ADP15 Datasheet

Click to download - ADP15 Instruction Manual

Suggested Instrumentation

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

ICA "In-Cell" Analogue Strain Gauge Amplifier

Options

There are currently no options available to view from this page. To view the various input and output options available for the ADP15, please view the ADP15 product datasheet by clicking here.

Applications

  • Remote display of process variables
  • PID control for pressure/load controlled systems
  • Crane load monitoring and protection
  • Can be used with any load cell or pressure transducer from LCM Systems, with built in amplifier
Back to ListingNext

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage