BF2 Low Range Stainless Steel Dual Cantilever Beam

Ranges 2kgf to 50kgf
Small Physical Size
1000ohm bridge resistance
Stainless Steel Construction

The LCM Systems range of Pioden Transducers has been widely used for many years.

The BF2 is constructed from stainless steel and is available in ranges between 2kg and 50kg.

The BF2 offers an excellent size/performance ratio, at a competitive price. The stainless steel dual cantilever design enables the rejection of off-centre forces, making the first choice in a number of material testing and weighing applications.

LCM Systems can supply the BF2 on it's own or integrated with any of the wide range of strain gauge based instrumentation available from LCM Systems.

Range (FSO)

2, 5, 10, 30, 50kg

Maximum Overload Range

200% with <±1% calibration shift

Output Sensitivity

2mV/V nominally

Zero Offset

<±2% FSO

Accuracy

<±0.1% FSO

Repeatability

<±0.1% FSO

Excitation Voltage

10vdc recommended, 15vdc maximum

Bridge Resistance

1000Ω standard

Insulation Resistance:

>1000MΩ at 250vdc

Operating Temperature Range

-20°C to +70°C

Compensated Temperature Range

+10°C to +60°C

Zero Temperature Coefficient

<±0.03% FSO/°C (<±0.01% FSO/°C optional)

Span Temperature Coefficient

<±0.03% FSO/°C (<±0.01% FSO/°C optional)

Environmental Protection Level

IP65

Connection Type

2 metres 4-core screened PVC cable

Wiring Connections:

+ve supply Red	-ve supply Blue
+ve signal Green	-ve signal Yellow

Options Available:

Consult Factory - Many Options and special versions available

Click to download - BF2 Product Datasheet

TR150 Handheld Battery Powered Indicator

ADW15 Panel Mounting Indicator/Controller

SGA Analogue Strain Gauge Amplifier

There are currently no options available to view from this page. To view the various options which may be available for the BF2, please view the BF2 product datasheet by clicking here.

Material test Machines
Rheometer Measurement
Spring Characteristic Profiling
Friction Testing
Switch Contact Testing

BF2 Stainless Steel Low Range Cantilever Beam Load Cell