Products : Instrumentation : Amplifiers & Conditioners : D-CAN Canbus Digital Strain Gauge to Data Converter

D-CAN Canbus Digital Strain Gauge to Data Converter



  • Simple mounting using M2 screw
  • Connections via plated through holes
  • Low profile to fit in very small apertures
  • Baud rates to 230k
  • High speed to 500 Readings/Sec
  • ±15KV ESD protected
  • Real mV/V calibration
  • Noise Immunity 5x heavy industrial level
  • Diagnostics LED
  • Remote shunt calibration
  • Very high stability
  • Peak and trough recording
  • Programmable dynamic filter
  • Operating voltage (5.4 - 18Vdc)

The D-CAN is a high performance digital signal conditioner for the precision measurement of strain gauge based transducers., providing a CANBus output. There are two product types available in the range; the DSC and DCELL. Both products offer a  high speed CAN output. The DCELL PCB is designed to fit inside the majority of sensors, providing a 'digital' load cell with the benefit of very high stability and an RS485 output.

Including the D-CAN into load cell based product enables the building of very high accuracy load cells, using the built in linearization and temperature compensation facilities. For applications where it is not possible to fit the DCELL within the transducer, there is an in line housing available (Model ILE).

For the DSC version of the product there is the DSJ1, which is a junction box "docking station" sealed to IP65, for the simple installation of a single DSC; or a 4-way version; the DSJ4.


D-CAN Spec




D-CAN Dims


Click here to download - D-CAN Datasheet

Click here to download - D-CAN Instruction Manual

Suggested Instrumentation

The D-CAN offers a CANbus digital output. LCM Systems can offer the D-CAN in a complete system, including sensors and bespoke software, written specifically for your application. The software is usually developed using the Visuallink software platform. Contact LCM Systems to discuss your software/application requirements.


There are currently no options available to view from this page. To view the various input and output options available for the D-CAN, please view the D-CAN product datasheet by clicking here.


  • Vessel weighing
  • Performance Yacht rig monitoring
  • Vehicle weighing
  • Automotive force measurement

Buy Now

Contact Us
Back to ListingNext

Copyright © 2019 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage