DCE Stainless Steel Stud Type Tension/Compression Load Cell

Ranges 100N to 50kN
Stainless Steel construction
Environmentally Sealed to IP65
Special Sizes and ranges available
Different mounting options available
Rationalised Output Option Available

The LCM Systems DCE load cell has been developed for applications that require the measurement of tensile and compressive forces, where space is limited.

As with most LCM products there a special variants that are available for this product. Popular variants include different thread sizes, integral connectors and high temperature versions.

The DCE can be supplied on it's own or integrated with any of the wide range of instrumentation products available from LCM Systems.

Typical applications include component testing, weighing systems.

Rated Load

100, 250, 500, 750N
1, 2.5, 5, 7.5, 10, 25, 50kN

Proof Load

150% of Rated Load

Ultimate Breaking Load

> 300% of Rated Load

Maximum Side Load

10% of Rated Load

Output

1.5 mV/V at Rated Load (nominal)

Non-Linearity

< ±0.25% of Rated Load

Non-Repeatability

< ±0.10% of Rated Load

Excitation Voltage

10vdc recommended, 15vdc maximum

Bridge Resistance

350Ω

Insulation Resistance

> 500MΩ @ 500vdc

Operating Temperature Range

-20 to +70°C

Compensated Temperature Range

-10 to +50°C

Zero Temperature Coefficient

< ±0.010% of Rated Load/°C

Span Temperature Coefficient

< ±0.010% of Rated Load/°C

Environmental Protection Level

IP65

Connection Type

2 metres 4-core screened PVC cable

Wiring Connections

Red +ve supply	Blue -ve supply
Green +ve signal	Yellow -ve signal

Connection Type

Special ranges and sizes available
Rationalised output available

Click here to download - DCE Datasheet

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

TR150 Battery Powered Handheld Portable Indicator

ADW15 Panel Mounting Load Cell Indicator/Controller

There are currently no options available to view from this page. To view the various options which may be available for the DCE, please view the DCE product datasheet by clicking here.

General Force Measurement
Wire Tension Measurement
Tensile Testing

DCE Stainless Steel Stud Type Tension and Compression Load Cell