Products : Legacy Products : DIA Stainless Steel Diaphragm Load Cell

DIA Stainless Steel Diaphragm Load Cell

DIA.

Features

  • Ranges 10 kg to 2000 kg
  • Stainless steel construction
  • Environmentally sealed to IP65 (IP67 can also be offered)
  • Special sizes and ranges available
  • Different mounting options available
  • Integral connector versions available

The LCM series of Diaphragm Load Cells have been designed for use in a wide selection of different applications, particularly where there are low height constraints, for load cell installation.

The flexibility in the design of the DIA series enables the customer to virtually design the load cell to suit their installation exactly. Our engineers are on hand to assist you with this. Some of the standard variations that we offer include: male or female centre threads, clear centre holes etc.

The DIA series can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated.

The DIA series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.

Specification

Rated Load (kgf) 10, 25, 50, 150, 250, 500, 1000, 2000
Proof Load 150% of Rated Load
Ultimate Breaking Load > 300% of Rated Load
Output 1.5 mV/V at Rated Load (nominal)
Non-Linearity < ±0.25% of Rated Load (typically)
Non-Repeatability < ±0.10% of Rated Load
Excitation Voltage 10vdc recommended, 15vdc maximum
Bridge Resistance 350Ω
Insulation Resistance > 500MΩ @ 500vdc
Operating Temperature Range -20 to +70°C
Compensated Temperature Range -10 to +50°C
Zero Temperature Coefficient < ±0.010% of Rated Load/°C
Span Temperature Coefficient < ±0.010% of Rated Load/°C
Environmental Protection Level IP65 (IP67 optional)
Connection Type 2 meters 4-core screened PUR cable
Wiring Connections
Red    +ve supply Blue     -ve supply
Green +ve signal Yellow -ve signal
Connection Type Special ranges and sizes available
Special mounting options
Special electrical connections

Dimensions

dia drawing

Downloads

Click here to download - DIA Datasheet

Suggested Instrumentation

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

TR150 Battery Powered Handheld Portable Indicator

ADW15 Panel Mounting Load Cell Indicator/Controller

Options

There are currently no options available to view from this page. To view the various options which may be available for the DIA, please view the DIA product datasheet by clicking here.

Applications

  • Process Measurement & Control
  • Automotive Testing
  • Low profile weighing systems

Buy Now

Contact Us
Back to ListingPreviousNext

Copyright © 2017 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage