Products : Load Cells : Load Pins : LMP Stainless Steel Load Measuring Load Pin

LMP Stainless Steel Load Measuring Load Pin



  • Ranges 500kg to 1500tonne
  • Stainless Steel Construction
  • Environmentally Sealed to IP67 (submersible versions available on request)
  • Anti-rotation plate supplied, if required
  • Many special design options available
  • Can be supplied with integralconnector
  • Versions available with integral signal conditioning; providing 0-10v, 0-5v, 4-20mA, RS485 outputs
  • Versions available to meet Offshore and Marine specifications
  • Application/Technical Sheet & design support Software available

The LCM range of Load Measurement Pins are designed for general use. They are machined from high tensile stainless steel and are normally supplied complete with an anti-rotation plate.

They are built to exacting standards and are suitable for use in exposed situations and can be supplied to withstand immersion in seawater.

This range of load cells is Proof Loaded to 150% of the normal rated load.

We offer a standard range of pins, covering the ranges between 0.5tonne to 1500tonne. However the nature of this style of product means that most pins are manufactured to meet customers' specific dimensional requirements.

The LMP range can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated. The LMP series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.


Rated Load (tonne) 0.5, 1, 2.5, 3.5, 6.5, 15, 25, 50, 100, 250, 500, 750, 1000, 1500
Proof Load 150% of Rated Load
Ultimate Breaking Load > 300% of Rated Load
Output 1.5 mV/V at Rated Load (nominal)
Non-Linearity < ±0.50% of Rated Load (typically)
Non-Repeatability < ±0.04% of Rated Load
Excitation Voltage 10vdc recommended, 15vdc maximum
Bridge Resistance 350Ω
Insulation Resistance > 500MΩ @ 500vdc
Operating Temperature Range -20 to +70°C
Compensated Temperature Range -10 to +50°C
Zero Temperature Coefficient < ±0.010% of Rated Load/°C
Span Temperature Coefficient < ±0.010% of Rated Load/°C
Environmental Protection Level IP67
Connection Type 5 metre 4-core screened PUR cable
Wiring Connections
Red    +ve supply Blue    -ve supply
Green +ve signal Yellow -ve signal
Connection Type Special ranges and sizes available
Special electrical connections
Integral signal conditioning
Submersible versions available
Hose protected cable


lmp drawing


Click here to download - LMP Datasheet

Click here to download - Load Pin Technical & Application Notes (TN1003)

To enable us to quote you for a custom design Load Pin, please click on the Questionnaire tab, complete the form and submit it to us.

Suggested Instrumentation

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

TR150 Battery Powered Handheld Portable Indicator

ADW15 Panel Mounting Load Cell Indicator/Controller

MAX Modular Expandable Analogue Amplifier System


The LMP or most custom design versions can be offered with built in electronics offering a wide variety of analogue voltage or current signals, using our ICA range in amplifiers. We can also offer RS485 digital signals (in various protocols), using our DCELL range of amplifiers, or CANbus using our D-CAN range.


Back to Listing

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage