Products : Load Cells : Tension & Compression Load Cells : STA-1 Aluminium Alloy S-Type Tension and Compression Load Cell

STA-1 Aluminium Alloy S-Type Tension and Compression Load Cell



  • Ranges 50, 100, 200, 300kg
  • Aluminium alloy construction
  • Environmentally sealed to IP66
  • Can be supplied complete with mating spherical rod-end bearings

The STA-1 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.

The STA-1 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers are a few examples.

The STA-1 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.


Rated Load (kg) 50, 100, 200, 300
Proof Load 150% of Rated Load
Ultimate Breaking Load > 300% of Rated Load
Output 2.0 mV/V at Rated Load (±10%)
Accuracy < ±0.03% of Rated Load
Non-Repeatability < ±0.01% of Rated Load
Excitation Voltage 10vdc recommended, 15vdc maximum
Bridge Resistance 415Ω
Insulation Resistance > 500MΩ @ 100vdc
Operating Temperature Range -20 to +70°C
Compensated Temperature Range -10 to +40°C
Zero Temperature Coefficient < ±0.003% of Rated Load/°C
Span Temperature Coefficient < ±0.002% of Rated Load/°C
Environmental Protection Level IP66
Connection Type PVC screened cable 3m long, via cable gland
Wiring Connections
Red +ve supply Blue -ve supply
Blue +ve sense Yellow -ve sense
Options Available Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button



All dimensions in millimetres

sta-1 drawing


Click here to download - STA-1 Datasheet

Suggested Instrumentation

TR150 Battery Powered Handheld Portable Indicator

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

ADW15 Panel Mounting Load Cell Indicator/Controller

SMW Wall Mounting Load Cell Indicator/Controller


There are currently no options available to view from this page. To view the various options which may be available for the STA-1, please view the STA-1 product datasheet by clicking here.


  • Hanging scales
  • Material test machines
  • Engine/motor dynamometers
  • General force measurement
Back to ListingPreviousNext

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage