Products : Load Cells : Load Links : TLL Stainless Steel Load Monitoring Link Load Cell

TLL Stainless Steel Load Monitoring Link Load Cell



  • Environmentally Sealed to IP66 (IP67 can also be offered)
  • Special Sizes and ranges available
  • Higher Range versions available
  • Amplified output version available
  • Ideally suited to be supplied calibrated with TR150 or TR200 battery powered indicators

The LCM series of Load Monitoring Links have been designed for lifting and weighing in rugged or harsh environments, being manufactured from entirely from Stainless Steel.

The TLL series are simple to install and are matched to standard shackle sizes. The links are normally supplied with a MIL specification plug and socket; the whole package is environmentally sealed to IP66.

The TLL series can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated.

The TLL series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.


Rated Load (tonne) 5, 10, 20, 25, 30, 40, 50, 100
Proof Load 150% of Rated Load
Ultimate Breaking Load > 300% of Rated Load
Output 1.5 mV/V at Rated Load (±10%)
Accuracy < ±0.25% of Rated Load
Non-Repeatability < ±0.04% of Rated Load
Excitation Voltage 10vdc recommended, 15vdc maximum
Bridge Resistance 350Ω
Insulation Resistance > 500MΩ @ 500vdc
Operating Temperature Range -20 to +70°C
Compensated Temperature Range -10 to +50°C
Zero Temperature Coefficient < ±0.010% of Rated Load/°C
Span Temperature Coefficient < ±0.010% of Rated Load/°C
Environmental Protection Level IP66 (IP67 optional)
Connection Type 5 metres 4-core PUR cable
Wiring Connections
Red +ve supply Blue -ve supply
Green +ve signal Yellow -ve signal
Options Available Special ranges and sizes available
Can be supplied complete with shackles
Can be supplied with integral signal conditioning
Optional complete carry kit, including indicator Special electrical connections


tll drawing


Click here to download - TLL Datasheet

Suggested Instrumentation

TR150 Battery Powered Handheld Portable Indicator

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

ADW15 Panel Mounting Load Cell Indicator/Controller

MAX Modular Expandable Analogue Amplifier System


 The TLL can be offered with the following options:-

Integral Amplifier, providing direct voltage or current output, using ICA range of products - Click here to view ICA details

Integral Amplifier, providing direct RS485 digital communications using DCELL range of products - Click here to view DCELL details


  • Cable Tension Monitoring
  • Under-hook Hoist and Crane Weighing
  • Towing/Mooring Tension
  • Crane Safe Load Monitoring
Back to ListingPreviousNext

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage