Products : Load Cells : Tension & Compression Load Cells : UF1 Low Range Isometric Force Sensor

UF1 Low Range Isometric Force Sensor

uf1

Features

  • Ranges 25g (1oz) to 1500g (54oz)
  • Low Deflection
  • High Output Sensitivity
  • High Overload Range
  • Versatile signal connection method
  • Versatile Mounting Arrangement

The LCM Systems UF1 series force sensors from the range of Pioden Transducers has been widely used in many applications for more than 40 years.

The UF1 has proved the first choice for many applications including muscular and membrane movement monitoring, yarn and fabric tension control, fluid viscosity measurement and even the force induced in butterfly wings during flight.

There are many other applications that the UF1 has been used in. It is most popular in applications where our customers need to measure small forces, with a good level of accuracy, minimal deflection and with a flexible mounting arrangement.

The UF1 can be supplied on it's own or combined with any of LCM Systems wide range of instrumentation products to provide either a simple or more complex monitoring or control system.

Specification

Range (FSO) 25g, 55g, 110g, 220g, 450g, 1000g, 1500g
Equivalent to:- 1oz, 2oz, 4oz, 8oz, 18oz, 36oz, 54oz
Maximum Overload Range 2500g for all ranges
Output Sensitivity 4mV/V nominally
Zero Offset < ±2% FSO
Accuracy < ±0.3% FSO
Repeatability < ±0.1% FSO
Excitation Voltage 10vdc maximum
Bridge Resistance 25g, 55g, 450g:- nominally 725Ω
110g, 220g, 1000g, 1500g:- nominally 1000Ω
Insulation Resistance > 100MΩ at 50vdc
Operating Temperature Range -40°C to +80°C
Compensated Temperature Range +10°C to +60°C
Zero Temperature Coefficient < ±0.05% FSO/°C
Span Temperature Coefficient < ±0.05% FSO/°C
Environmental Protection Level IP51
Deflection < ±0.03mm
Connection Type

Via 4off PTFE insulated solder terminals
Pin A  + Signal          Pin B  + Excitation
Pin C  - Signal          Pin D  - Excitation

Dimensions

uf1 drawing

Downloads

Click here to download - UF1 Datasheet

Suggested Instrumentation

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

TR150 Battery Powered Handheld Portable Indicator

ADW15 Panel Mounting Load Cell Indicator/Controller

Options

There are currently no options available to view from this page. To view the various options which may be available for the UF1, please view the UF1 product datasheet by clicking here.

Applications

  • Isometric Force Measurement
  • Muscle Contraction Measurement
  • Textile Tension Measurement
  • Torque Reaction Measurement
Back to ListingPreviousNext

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage