ADP15-SP16 Digital Indicator & Multi-Setpoint Controller
- Up to 16 Set Points, programmable from ADP15 keypad
- 4 and 8 relay DIN rail module
- Individual set points & hysteresis values
- Selectable set point quality
- Relay contact rating 230V @ 5A AC
- PID Control
- Programmable output actions
|
The DIN rail mounted remote relay units offer an increased number of set points over that provided by a standard ADP15 indicator/controller. This allows for multi action operations.
The software of the ADP-SP16 gives the user freedom to program the number of set points for their requirements. A single ADP-SP16 will control up to 16 set points, programmed from its front panel. Set points can be individually set up with In Flight compensation and hysteresis values. Separate 'Output Latch' and 'Output Action' for up to 14 of the 16 set points is available, settable from the front panel of the ADP-SP16. A special mnemonic allows the user to specify the number of set points to be used.
A DIN rail mounted power supply unit is required where more than 4 set points are to be used. The units are driven from the ADP-SP16 via an internal special remote driver board. All relays are pluggable and connections are made via field screw terminals. The operating procedures for these units are to be considered together with the standard ADP15 when preparing the system for operation.
Outputs include:-
- Analogue (Industry standard)
- Digital Communications
- Relays
- Printer Drive
Options and Accessories include:-
- Panel mounting via DIN rail mounting
- IF25 Interface module connects up to 25 ADPs to 1 RS232 port
- Power supplies for 110/230 V AC or 9-32V DC
- Communications for Printer, PLC or PC.
Software Options include:-
- Power Factor
- Printers DP data only and TDP for real time/date
| 
