Products : Load Cells : Compression Load Cells : CDIT-2 Stainless Steel Low Profile Compression Load Cell

CDIT-2 Stainless Steel Low Profile Compression Load Cell

cdit-2

Features

  • Ranges 250kg to 100te
  • Stainless Steel, fully welded construction
  • High Stability
  • Low Height
  • Environmentally Sealed to IP68
The CDIT-2 series of Load Cells have been designed for a wide range of force measurement and weighing applications where space is limited.
 
The CDIT-2 is constructed from stainless steel and has a fully welded construction, offering a high level of corrosion resistance for use in harsh environments.
 
This range of load cells is available with ranges covering 0-250kg to 0-100te.
 
There are many applications suited to the CDIT-2, including restricted height weighing applications, general force measurements and press calibration.
 
LCM Systems can provide the CDIT-2 on its own or combined with any of our instrumentation range, to offer a more complete package. Please consult our technical department for any advice required on suitable instrumentation solutions.LCM Systems can provide the CDIT-2 on its own or combined with any of our instrumentation range, to offer a more complete package. Please consult our technical department for any advice required on suitable instrumentation solutions.

Specification

Rated Load (FSO) 250, 500, 1000, 2500, 5000, 7500 kg
10, 15, 20, 30, 50, 75, 100 te
Overload Range 150% FSO
Ultimate Breaking Load > 300% FSO
Output 2mV/V (±0.1%)
Zero Balance <±1% FSO
Non-Linearity ≤±0.03% FSO
Non-Repeatability ≤±0.01% FSO
Maximum Transverse Load 50% FSO
Transverse Load Effect (at 10% FSO) <±0.03% FSO
Excitation Voltage 10vdc recommended (18vdc maximum)
Input Resistance 700Ω ±3Ω
Output Resistance 7000Ω ±3Ω
Insulation Resistance >5GΩ @ 50vdc
Compensated Temperature Range -10 to +40 °C
Operating Temperature Range -20 to +70 °C
Storage Temperature Range -20 to +80 °C
Zero Temperature Coefficient ≤±0.005% FSO/°C
Span Temperature Coefficient ≤±0.003% FSO/°C
Environmental Protection Level IP68
Electrical Connection Glanded PVC cable - 5 metres long
Weight (load cell only) 250kg to 10te                  1.2kg
15te                                   2kg
20te to 30te                     3.8kg
50te to 100te                   9.4kg

Dimensions

cdit-2 drawing

Downloads

Click here to download - CDIT-2 Datasheet

Suggested Instrumentation

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

TR150 Battery Powered Handheld Portable Indicator

ADW15 Panel Mounting Load Cell Indicator/Controller

Options

There are currently no options available to view from this page. To view the various options which may be available for the CDIT-2, please view the CDIT-2 product datasheet by clicking here.

Applications

  • Process Measurement & Control
  • Automotive Testing
  • Low profile weighing systems
Back to ListingPreviousNext

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage