Products : Custom Design : Custom Shackle Load Cell Solutions : LCM4573 55te Low Temperature Telemetry Load Shackle

LCM4573 55te Low Temperature Telemetry Load Shackle

LCM4573 telemetry low temp shackle

Design Brief

This enquiry was received from a bespoke solutions provider to the Canadian heavy lift and transportation market. Primarily supplying to the oil, energy, mining and petrochemical markets, their capabilities include jacking, lifting, weighing, ballasting and transportation. They operate a fleet of heavy lift cranes with capacities from 50te to over 1000te.

The requirement was for 55te telemetry load shackles that could function in the sub-zero temperatures of the Canadian winter, so had to be robust enough to operate consistently in temperatures as low as -40°C. The customer had seen our standard TELSHACK-B load shackles on our website, but as they are rated to -20°C, were not quite suitable. Utilising over 30 years of load measurement experience, our design engineers were able to adapt the design to make it suitable for their requirement.

A total of 14 load shackles were supplied, which were fitted to a lifting beam to enable load testing to be carried out. Suspended from a 750te crane, the load beam has 14 sliders along its length, each of which were fitted with a load shackle. Any number of sliders can be used for a lift, depending on the size and weight of the item being lifted. The sliding mechanisms enable the lifting strops to be positioned in such a way as to ensure the load is evenly distributed along the length of the lifting beam and that it is evenly balanced. 

For the purposes of testing the beams load capacity, a number of counter weights were lifted and the resulting loads recorded. The photograph below shows two load shackles in use, but over the course of the tests all 14 were in operation.

The main criteria we were given was as follows:-

  1. Must be suitable for use in extremely low temperatures
  2. Load cell to be a bow load shackle
  3. Construction robust enough for heavy lifting environment
  4. Software to show individual load shackle values as well as total value
  5. Data transmitted wirelessly to laptop/PC
  6. Full material traceability

ALE Roll Lift

Features

  • Manufactured using a Crosby G2140 bow shackle
  • Existing load shackle pin used for added traceability
  • Environmetally sealed to IP67
  • Operating temperature range of -40°C to +60°C
  • Supplied with load centralising bobbin for optimal accuracy
  • Transmission distanceof 120m (clear line of site)
  • Supplied with custom designed software
  • Complete system supplied fully calibrated and issued with certificates traceable to UKAS Standards

Specification

LCM4573 Spec

Downloads

LCM4573 Low Temperature Telemetry Shackle

2D Drawing

LCM4573 Dims

3D PDF Model

LCM4573

Click on the image to view the 3D model

(you may need to download the file and open outside of your web browser)

Test Results

AP110 - LCM4573 Low Temperature Telemetry Shackle

Related Notes

The LCM4573 telemetry load shackle was designed using the standard TELSHACK-B range as a basis for the product. Utilising our 30 years of load measurement experience we were able to have this custom product designed and manufactured in 6 weeks by replacing some of the key component parts with variants that had lower operating temperature ratings than the standard load shackle range.

The load shackles operated satisfactorarily during the load tests in temperatures of around -30°C. The customer subsequently ordered a further 14 shackles for the testing of an additional lifting beam.

Back to ListingPreviousNext

Copyright © 2017 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage