The LCM range of Load Measurement Pins are designed for general use. They are machined from high tensile stainless steel and are normally supplied complete with an anti-rotation plate.
They are built to exacting standards and are suitable for use in exposed situations and can be supplied to withstand immersion in seawater.
This range of load cells is Proof Loaded to 150% of the normal rated load.
We offer a standard range of pins, covering the ranges between 0.5tonne to 1500tonne. However the nature of this style of product means that most pins are manufactured to meet customers' specific dimensional requirements.
The LMP range can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated. The LMP series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.
|Rated Load (tonne)||0.5, 1, 2.5, 3.5, 6.5, 15, 25, 50, 100, 250, 500, 750, 1000, 1500|
|Proof Load||150% of Rated Load|
|Ultimate Breaking Load||> 300% of Rated Load|
|Output||1.5 mV/V at Rated Load (nominal)|
|Non-Linearity||< ±0.50% of Rated Load (typically)|
|Non-Repeatability||< ±0.04% of Rated Load|
|Excitation Voltage||10vdc recommended, 15vdc maximum|
|Insulation Resistance||> 500MΩ @ 500vdc|
|Operating Temperature Range||-20 to +70°C|
|Compensated Temperature Range||-10 to +50°C|
|Zero Temperature Coefficient||< ±0.010% of Rated Load/°C|
|Span Temperature Coefficient||< ±0.010% of Rated Load/°C|
|Environmental Protection Level||IP67|
|Connection Type||5 metre 4-core screened PUR cable|
|Connection Type||Special ranges and sizes available
Special electrical connections
Integral signal conditioning
Submersible versions available
Hose protected cable
Click here to download - LMP Datasheet
Click here to download - Load Pin Technical & Application Notes (TN1003)
To enable us to quote you for a custom design Load Pin, we advice download the Load Pin Questionnaire, and enter your requirements and fax it to LCM Systems.
SGA Strain Gauge Analogue Amplifier
LCA15 Intelligent Strain Gauge Amplifier/Controller
TR150 Battery Powered Handheld Portable Indicator
ADW15 Panel Mounting Load Cell Indicator/Controller
MAX Modular Expandable Analogue Amplifier System
|The LMP Load Pin is available with many different options. LCM Systems regularly design custom Load Pins, which can be specified using our Load Pin Questionnaire.
The LMP or most custom design versions can be offered with built in electronics offering a wide variety of analogue voltage or current signals, using our ICA range in amplifiers. We can also offer RS485 digital signals (in various protocols), using our DCELL range of amplifiers, or CANbus using our D-CAN range.
Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).