STA-3 Alloy Steel S-Type Tension and Compression Load Cell |
|
|
|
 |
| |
| |
- Features
- Specification
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
- Ranges 50, 100, 200, 300, 500, 1000kg
- Alloy steel nickel plated construction
- Environmentally sealed to IP67
- Can be supplied complete with mating spherical rod-end bearings
The STA-3 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
The STA-3 is suitable for many applications where a tension and compression load cell is required, in harsh environments. Applications such as vessel weighing, material test machines and dynamometers area few examples.
This range of products is ideally suited for many other OEM applications, offering a highly cost effective solution for a wide variety of applications.
The STA-3 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.
|
| Rated Load (kg) |
50, 100, 200, 300, 500, 1000 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
2 mV/V at Rated Load (±0.1%) |
| Accuracy |
< ±0.02% of Rated Load |
| Non-Repeatability |
< ±0.01% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350Ω |
| Insulation Resistance |
> 500MΩ @ 100vdc |
| Operating Temperature Range |
-30 to +70°C |
| Compensated Temperature Range |
-10 to +40°C |
| Zero Temperature Coefficient |
< ±0.004% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Environmental Protection Level |
IP67 |
| Connection Type |
PVC screened cable 3m long, via cable gland |
| Options Available |
Can be supplied with instrumentation
Spherical Seating Rod-End Bearings
Compression Load Button |
|
| There are currently no options available to view from this page. To view the various options which may be available for the STA-3, please view the STA-3 product datasheet by clicking here. |
- Hanging scales
- Material test machines
- Engine/motor dynamometers
- General force measurement
- Process weighing
|
|
|
|
|
|
