STA-4 Alloy Steel "S" Type Tension/Compression Load Cell

Ranges 1500, 2000, 3000, 5000kg
Alloy steel nickel plated construction
Environmentally sealed to IP67
Can be supplied complete with mating spherical rod-end bearings

The STA-4 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.

The STA-4 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers area few examples.

This range of products is ideally suited for many other OEM applications, offering a highly cost effective solution for a wide variety of applications.

The STA-4 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.

Rated Load (kg)

1500, 2000, 3000, 5000

Proof Load

150% of Rated Load

Ultimate Breaking Load

> 300% of Rated Load

Output

2 mV/V at Rated Load (±0.1%)

Accuracy

< ±0.02% of Rated Load

Non-Repeatability

< ±0.01% of Rated Load

Excitation Voltage

10vdc recommended, 15vdc maximum

Bridge Resistance

350Ω

Insulation Resistance

> 500MΩ @ 100vdc

Operating Temperature Range

-30 to +70°C

Compensated Temperature Range

-10 to +40°C

Zero Temperature Coefficient

< ±0.004% of Rated Load/°C

Span Temperature Coefficient

< ±0.002% of Rated Load/°C

Environmental Protection Level

IP67

Connection Type

PVC screened cable 3m long, via cable gland

Wiring Connections

Green	+ve supply	Blue	-ve supply
Red	+ve signal	White	-ve signal

Options Available

Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button

Click here to download - STA-4 Datasheet

TR150 Battery Powered Handheld Portable Indicator

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

ADW15 Panel Mounting Load Cell Indicator/Controller

SMW Wall Mounting Load Cell Indicator/Controller

There are currently no options available to view from this page. To view the various options which may be available for the STA-4, please view the STA-4 product datasheet by clicking here.

Hanging scales
Material test machines
Engine/motor dynamometers
General force measurement
Process weighing

STA-4 Alloy Steel S-Type Tension and Compression Load Cell