Products : Ecommerce Products : INSTRUMENTATION PRODUCTS : Hand Held Indicators : TR150 Battery Powered Handheld Load Cell Indicator

TR150 Battery Powered Handheld Load Cell Indicator



  • Powered by 2 off Internal AA Alkaline Batteries
  • Handheld and portable.
  • Environmentally sealed to IP65 (NEMA 4)
  • Microprocessor based, allowing single pass calibration facility.
  • 7½ digit LCD display, with battery low, peak, trough, net, shunt calibration indication.
  • Tactile keyboard, with dual range selection, peak/valley hold, gross/net, shunt calibration and on/off controls.
  • Dual Range Facility.
  • Battery life of 450 hours in low power mode, with 350ohm bridge connected.
  • Auto Sleep facility which can be set to suit or disabled.
  • RS232 Output Option Available
  • TEDS Compatible (IEEE 1451 - template 33)

The TR150 is a completely portable, precision instrument packaged in a small, robust IP65 (NEMA 4) enclosure, weighing only 260 grams. The TR150 accepts an input range of up to 50mV/V.

For simplified use, the operator only has access to six keys; on/off, gross/net, peak, trough, hold and shunt cal. Calibration and configuration can be performed from the front panel, with protection against accidental or un-intentional changes. The configuration menu is very simple and enables the setting of a tare value, display resolution, filter rate, auto power off and selection of low power mode.

There are 3 calibration options; a single pass auto-calibration, entering of load cell sensitivity and corresponding display value and entering of offset and gain values for corresponding display values.

Two separate ranges are available, which enable the instrument to read and display two separate parameters; i.e. lbs/kg, tonne/kN, high/low resolution, fast/slow response etc. The menu options offer the engineer the ability to tailor the instruments response to the application. In each range all the variables can be set, including zero and filtering.

Annunciators on the display give a constant indication of the operating mode of the TR150.

The TR150 features an innovative power saving facility which, when enabled can offer up to 450 hours of battery life with a 350 ohm bridge connected. In normal power mode up to 45 hours battery life is achieved with a 350 ohm bridge. The TR150 also incorporates an auto power off facility, which can be set during configuration in 1 minute increments up to 99 minutes, or it can be disabled so the instrument is powered on until the off key is depressed.

The TR150 can be supplied with a number of options including a leather carry case, which enables the full operation of the indicator whilst fitted in the case.


TR150 Spec


TR150 Dims


Click here to download - TR150 Datasheet

Click here to download - TR150 Instruction Manual

Suggested Instrumentation

The TR150 can be supplied calibrated as a system with any of LCM Systems products. If ordered with any sensor, this calibration will be performed, with traceability to UK National Standards at no extra cost.


There are currently no options available to view from this page. To view the various input and output options available for the TR150, please view the TR150 product datasheet by clicking here


  • Portable load cell systems
  • Shackle load cell display
  • Link load cell display
  • Hire fleet load cell display
  • Portable calibration systems

Buy Now

DescriptionPrice Ex VATMeasurement UnitsStockQty
TR150£217.0036 in stock
TR150-RS232£255.00 5 in stock
TR150 CARRY CASE£22.5081 in stock

1 week

Contact Us
Back to ListingPreviousNext

Copyright © 2019 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage