UF1 Low Range Isometric Force Sensor |
|
|
|
 |
| |
| |
- Features
- Specification
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
- Ranges 25g (1oz) to 1500g (54oz)
- Low Deflection
- High Output Sensitivity
- High Overload Range
- Versatile signal connection method
- Versatile Mounting Arrangement
The LCM Systems UF1 series force sensors from the range of Pioden Transducers has been widely used in many applications for more than 40 years.
The UF1 has proved the first choice for many applications including muscular and membrane movement monitoring, yarn and fabric tension control, fluid viscosity measurement and even the force induced in butterfly wings during flight.
There are many other applications that the UF1 has been used in. It is most popular in applications where our customers need to measure small forces, with a good level of accuracy, minimal deflection and with a flexible mounting arrangement.
The UF1 can be supplied on it's own or combined with any of LCM Systems wide range of instrumentation products to provide either a simple or more complex monitoring or control system.
|
| Range (FSO) |
25g, 55g, 110g, 220g, 450g, 1000g, 1500g
Equivalent to:- 1oz, 2oz, 4oz, 8oz, 18oz, 36oz, 54oz |
| Maximum Overload Range |
2500g for all ranges |
| Output Sensitivity |
4mV/V nominally |
| Zero Offset |
< ±2% FSO |
| Accuracy |
< ±0.3% FSO |
| Repeatability |
< ±0.1% FSO |
| Excitation Voltage |
10vdc maximum |
| Bridge Resistance |
25g, 55g, 450g:- nominally 725Ω
110g, 220g, 1000g, 1500g:- nominally 1000Ω |
| Insulation Resistance |
> 100MΩ at 50vdc |
| Operating Temperature Range |
-40°C to +80°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
< ±0.05% FSO/°C |
| Span Temperature Coefficient |
< ±0.05% FSO/°C |
| Environmental Protection Level |
IP51 |
| Deflection |
< ±0.03mm |
| Connection Type |
Via 4off PTFE insulated solder terminals |
|
| There are currently no options available to view from this page. To view the various options which may be available for the UF1, please view the UF1 product datasheet by clicking here. |
- Isometric Force Measurement
- Muscle Contraction Measurement
- Textile Tension Measurement
- Torque Reaction Measurement
|
|
|
|
|
|
