ADP15-DI Dual Current and Voltage Input Digital Indicator and Controller |
|
|
|
 |
- Features
- Specification
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
- Dual DC Voltage 0V to 10V or Dual DC Current 4mA to 20mA
- Microprocessor based design
- Peak hold
- Independent scaling of each input
- Full calibration & programming via keypad & communications port
- Isolated wide range AC & DC powering
- Isolated analogue outputs
- Input signal relationships include:- (A+B) (A/B) (A-B) (AxB) and A = process, B + set point value with scaling factor
- 4½ digit high resolution
The ADP15-DI range of products is very versatile, accepting a wide range of different signal input types and ranges.
The ADP15-DI flexibility makes it the first choice for many control system designers. Supporting products like PC software, printers, and sensors, means most customers can deal with a single supplier.
Outputs include:- Analogue voltage and current, industry standard digital communications, Relays, Printer Drive
Options and Accessories include:
Panel mounting via DIN rail mounting
IF25 Interface module (connects up to 25 ADPs to 1 RS232 port)
Power supplies for 110/230 V AC or 9-32V DC
Communications for Printer, PLC or PC
The ADP15-DI can be supplied with a wide range of different sensors from the LCM Systems range and can be combined with other instrumentation. Please consult the LCM technical department to discuss your application.
|
Input Type
|
Input Ranges
|
Order Code
|
| DC Voltage |
Dual 0-10V |
DIV |
| DC Current |
Dual 4-20mA |
DIA |
Outputs (analogue)
|
| 0 to 1V |
V1 |
| 0 to 5V |
V2 |
| 1 to 5V |
V3 |
| 0 to 10V |
V4 |
| -10 to +10V |
V5 |
| 0-1mA |
A1 |
| 0-20mA |
A2 |
| 4-20mA |
A3 |
| 10-50mA |
A4 |
| 0-5mA |
A5 |
| 0-10mA |
A6 |
| Pulse Frequency |
F1 |
Other Information
|
| Accuracy Typical |
±0.08% of output, ± 0.08%FSD |
| Resolution |
As display resolution, max 15 bits |
| Calibration |
By 15-turn pre sets for gain and offset |
| Inversion |
By keypad value |
| Isolation |
±130V RMS or DC max to analogue input or to any other port |
| Ranging |
Fully keypad scalable over desired display range |
Communications Port
|
Details
|
Order code
|
| RS485/232 |
RS485 - For up to 32 instruments on 1 bus, 4 wire |
COM 1 |
| |
RS232 printer or direct connection to 1 device, 3 wire |
|
| 20mA current loop |
For up to 25 instruments per interface, 4 wire |
S1 |
Other Information
|
| Baud |
rates 300, 600, 1200, 2400, 4800, 9600 (19200 MANTRABUS only) |
| Electrical isolation |
±130V RMS or DC max to analogue input or any other port |
| Formats |
MODBUS RTU, MANTRABUS and printer output formats |
Alarm/Control Outputs
|
Details
|
Order code
|
| SPCO |
1 relay on SP1 |
R1 |
| DPCO |
1 relay on SP1 |
R2 |
| SPCO |
2 relays on SP1& 2 |
R3 |
| SPCO |
1 relay on SP2 |
R4 |
| DPCO |
1 relay on SP2 |
R5 |
Other Information
|
| Relays |
230V at 5A AC resistive |
| Isolation |
±130V RMS |
| Keypad Programmable |
Hysteresis, Latching, Output Inversion, Delay Times |
| PID values and options |
Time Proportioning. |
Power Supplies
|
Details
|
Order code
|
| 240 |
220V-230V AC 50-60Hz 10W |
240 |
| 110 |
110V-120V AC 50-60Hz 10W |
110 |
| 12 &24V |
9-32V DC 10W isolated |
12/24 |
Mounting Type
|
Order code
|
| Front Panel |
P |
| Din Rail Adaptor |
D |
Communication Port CP Operation
|
| All ADP15 display data can be accessed via the communications port along with relay, PID power and EEPROM status. |
| All ADP15 user configurable data can be changed including EEPROM enable/disable and relay reset (ADP15 address code cannot be changed). |
Other Options & Accessories
|
| One pass calibration |
| 20mA PC Communications Interface (IF25) |
| VisualLink PC SCADA Software |
Base ADP15
|
| Input Filter |
Programmable to average up to 64 display updates. |
| Displays |
7 segment LED 4.5 digit 10mm.3 x 3mm LED's 2 for relay status, 1 for program and hold indication. |
| Update |
Rate Up to 10 updates per seconds |
Controls
|
| 4 membrane panel keys |
Scroll key to view/update parameter. |
| |
Digit select key. |
| |
Digit increment key. |
| |
Reset key. |
| |
Keypad disable by internal links behind front panel. |
| |
Hold function by digit select key when in input mode. |
Data Retention/Protection
|
| Retention |
10 years for set up values, minimum of 100,000 write cycle |
| |
Protection of data and function(s) Watchdog timer giving repeat auto resets. |
| |
Impending power detection and hold off. |
| |
Keypad security and time out. |
CE & Environmental
|
| Storage temperature |
-20 to +70ºC |
| Operating temperature |
-10 to 50°C |
| Relative humidity |
95% maximum non condensing |
| Safety/Low Voltage Directive |
73/23/EEC amended by 93/68/EEC xxxBS EN 61010-1 |
| EMC Directive |
89/336/EECxxx Basic Standard BS EN 61326 |
| EMC Emissions |
BS EN 55011 |
| EMC Immunity |
BS EN 61000-42 |
Physical
|
| Case Dimensions |
DIN 72 x 72 x 163mm (excluding mounting terminal) |
| Case Material |
Grey Noryl, flame retardant |
| Weight |
750 grams |
| Terminals |
2.5mm, saddle field terminals |
| Accessibility |
All electronics removable through front panel leaving field wiring and case in situ |
|
| There are currently no options available to view from this page. To view the various input and output options available for the ADP15-DI, please view the ADP15-DI product datasheet by clicking here. |
- Load Cell based Balancing systems
- Differential pressure measurement
- Pressure compensated force measurement
|
|
|
|
|
|
