ADW15 Multi-Setpoint Weighing Controller
- All standard ADW15 system features retained
- Programmable from the ADW keypad
- 4 and 8 relay Din Rail modules
- Individual set point, In-flight & hysteresis values
- Programmable output actions
- Selectable set point values
- Relay contact rating 230V @ 5A AC
|
The DIN rail mounted remote relay units offer an increased number of set points over that provided by a standard ADW15 strain gauge indicator/controller. This allows for multi action operations such as batch and recipe control.
The software of the ADW-SP16 gives the user freedom to program the number of set points for their requirements. A single ADW-SP16 will control up to 16 set points, programmed from its front panel. Set points can be individually set up with In Flight compensation and hysteresis values. Separate 'Output Latch' and 'Output Action' for up to 14 of the 16 set points is available, settable from the front panel of the ADW-SP16.
A special mnemonic allows the user to specify the number of set points to be used. A DIN rail mounted power supply unit is required where more than 4 set points are to be used. The units are driven from the ADW-SP16 via an internal special remote driver board. All relays are pluggable and connections are made via field screw terminals.
The operating procedures for these units are to be considered together with the standard ADW15 when preparing the system for operation.
Inputs
- Standard Strain Gauge input 100mS sampling rate
Outputs
- Analogue (Industry standard)
- Digital Communications
- Relays
- Printer drive
Options and Accessories
- IF25 Interface module connects up to 25 ADW15's to one RS232 port
- Printers DP data only and TDP for real time/date
- Panel Mounting or Din Rail Mounting
- Power supplies for 115/230V AC, 9-32V DC
| 
