BP16UVW Voltage Output Pressure Transmitter |
|
|
|
|
|
| |
| |
| |
- Features
- Specification
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
|
The LCM Systems range of Pioden Transmitters has been widely used for many years.
The BP16UVW range of pressure transmitters combine the excellent performance of bonded foil strain gauge technology with a single piece stainless steel diaphragm construction, to provide an excellent price/performance ratio, suitable for use in many arduous measurement applications, with integral signal conditioning, providing an amplified voltage output.
The BP16UVW construction makes it ideal for a wide range of applications, including, hydraulic lifting, mobile hydraulic vehicles, portable test gear, air frame test rigs amongst others.
The most popular version of the BP16UVW is the integral cable version, which is supplied with a 2 metre PVC cable length. However, an integral connector version is also available, as are versions with different cable lengths or different cable types.
The BP16 family of products offers a variety of output formats (please refer to the BP16 and BP16EF datasheets).
LCM Systems can supply the BP16 on its own or integrated with any of the wide range of instrumentation available from LCM Systems
|
| Pressure Range (FSO) |
100, 150, 200, 500, 1000, 2000, 3000, 5000, 10000, 15000 psig |
| Overpressure Range |
200% with <±1% calibration shift
(125% for 15,000psi version) |
| Burst Pressure 400% (200% for 15,000psi version) |
undefined |
| Output Signal |
BP16U - 3-wire 0volt (5V span, ±0.1% tolerance)
BP16V - 3-wire 0-10 volt(10V span, ±0.1% tolerance)
BP16W - 4-wire 0-10 volt(10V span, ±0.1% tolerance) |
| Zero Offset |
< ±1% FSO |
| Accuracy |
< ±0.1% FSO (±0.7% for 100-200psi versions) |
| Repeatability |
< ±0.1% FSO |
| |
BP16U - 8.5Vdc to 28Vdc Supply Voltage |
| Minimum Output Load |
BP16U - 5000Ω
BP16V - 5000Ω
BP16W - 5000Ω |
| Operating Temperature Range |
-20°C to +70°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
<±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Span Temperature Coefficient |
<±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Environmental Protection Level |
IP66 |
| Connection Type |
2 metres 4-core screened PVC cable, or
4 pin Lumberg connector (c/w 5m PUR cable) |
| Options Available |
Consult Factory - Many Options and special versions available |
|
|
There are currently no options available to view from this page. To view the various options which may be available for the BP16UVW, please view the BP16UVW product datasheet by clicking here.
Alternatively, if you require a Pressure Transmitter with a Current output, Click here, or for a Strain Gauge output Click here.
|
- On-board vehicle weighing
- Earthmoving vehicle hydraulic system protection/weighing
- Portable hydraulic test sets
- Air frame test rigs
- Hydraulic system feedback control
|
|
|
|
|
|
