SILL Self Indicating Link Load Cell |
|
|
|
- Features
- Specification
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
- Ranges 2.5 tonne to 200 tonne
- Lightweight Aluminium Construction
- Shackle holes are steel bushed
- Environmentally Sealed to IP66
- Audible alarm facility as standard
- Can display as standard in t, kg, lb & kN Selectable by operator
- Remote handheld facility available
- Peak Hold facility
- Can be supplied with various bespoke software packages
The LCM SILL series have been designed for lifting and weighing in rugged or harsh environments, being manufactured from high tensile aluminium to minimise weight (has steel bushes to provide added wear protection from shackles etc).
The SILL series are simple to install and are matched to standard shackle sizes. The have a built in display which can be selected by the user to display the applied weight or force in t, kg, lb or kN. There is an in-built audible alarm, which can be set by the operator, to warn when an applied weight/force level is met.
For applications where the operator is unable to read the display, there is a handheld remote available. This remote replicates exactly, all the functionality that is available on the link itself.
Other features that are available include Peak Hold, Gross/Net, Pre-set Tare entry. There is also a RS485 digital output available. LCM Systems can offer a software design facility to design bespoke software to meet any specific application requirements that may be required.
|
| Rated Load (tonne) |
2.5, 5, 10, 12, 20, 25, 50, 100, 200 |
| Proof Load |
200% of rated load |
| Safety Factor |
500% of rated load (except 100t, 400% & 200t - 350%) |
| Display |
6 digit LCD, 25mm high digits, with unit indication |
| Non-Linearity |
< ±0.2% of Rated Load |
| Non-Repeatability |
< ±0.05% of Rated Load |
| Power Supply |
9 volt PP3 battery (life 50 hours minimum) |
| Operating Temperature Range |
-10 to +60°C |
| Compensated Temperature Range |
-10 to +60°C |
| Zero Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Environmental Protection Level |
IP66 |
|
| There is no suggested instrumentation for this product, as it is a self contained product. We are able to offer various bespoke software for monitoring and control, from a single or multiple SILL's. Please contact our technical department to discuss your requirements. |
There are currently no options available to view from this page. To view the various options which may be available for the SILL, please view the SILL product datasheet by clicking here.
|
- Under hook crane weighing
- Crane load testing
- Beam proof testing
- Water bag calibration
- Cable tension measurement
|
|
|
|
|
|
