This enquiry was received from an events and production lighting company, based in New Zealand. The requirement was to measure the load applied to hoist in the entertainment and events industry. The load cell had to have a 5:1 safety factor and needed a digital RS485 output, so it could be interfaced with their own control system.
This customer had already ordered similar shackle from LCM, with analogue outputs, as part of a development project. They were so pleased with our service and the quality/performance of the earlier products, that they had no hesitation in working with us on this project.
The main criteria we were given was as follows:-
|Rated Load (RL):||2 tonne|
|Proof Load:||4 tonne|
|Ultimate Breaking Load:||>10tonne|
|Output:||RS485 Half-Duplex, 17 bit resolution, with ASII protocol|
|Excitation Voltage:||5.4vdc to 18vdc|
|Insulation Resistance:||>100MΩ @ 50vdc|
|Operating Temperature Range:||-20 to +60°C|
|Compensated Temperature Range:||-10 to +40°C|
|Zero Temperature Coefficient:||<±0.01% of Rated Load/°C|
|Span Temperature Coefficient:||<±0.01% of Rated Load/°C|
|Environmental Protection Level:||IP67|
|Connection Type:||Integral 4 way M8 connector, supplied with mating field wireable connector|
There are no downloads for this product.
Click on the image to view the 3D model
(you may need to download the file and open outside of your web browser)
The LCM3742 shackle load cell was designed to meet the customers requirements precisely. The final product included had design features that suited larger volume manufacture. This enabled the customer to realise savings of better than 50%, with production volumes exceeding 200 pieces.
The RS485 output from the load cell was achieved with our DCELL product. This is an in-cell signal conditioner that is available in several different protocols. Further details can be found on the DCELL product page. We have supplied, with similar products, for other customers, a complete turnkey solution. This includes the supply of specially written software, to remotely monitor sveral load cells, generate reports and datalog readings. This is developed in house by LCM Systems engineers, using the Visuallink Development Software Platform.
LCM Systems offer a wide range of standard shackle load cells and also have an extensive selection of custom design versions, which could also be used to satisfy other applications. Many of these products are supplied with our TR150 handheld battery powered indicator, with built in analogue signal conditioning, digital outputs or with wireless telemetry.
We have manufactured shackle load cells based on many different shackle manufacturers' products, including; Crosby, Van-Beest, GN Rope to name a few.
Copyright © 2018 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).