Products : Load Cells : Tension & Compression Load Cells : STA-7 Low Range S Type Tension & Compression Load Cell

STA-7 Low Range S Type Tension & Compression Load Cell

sta-7

Features

  • Ranges 1 to 50kg
  • High Accuracy
  • Aluminium Alloy
  • Weighs only 300g
  • Integral Overload Stops on 1, 2, 5kg versions

The STA-7 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearings.

The STA-7 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as material test machines, weighing, general force measurement etc.

Tension and compression overload stops are supplied as standard on all ranges up to 5kg. This feature helps to protect the load cell against accidental damage up to 500% of the load cell range.

The STA-7 series can be supplied on it’s own or combined with our extensive range of instrumentation to provide a complete load monitoring system.

Specification

Rated Load (FSO) 1, 2, 5, 10, 25, 50 kg
Overload Range 150% FSO (500% on 1, 2, 5kg - using overload stops)
Ultimate Breaking Load >300% FSO
Output 2.0 mV/V (±0.1%)
Zero Balance <±1% FSO
Linearity <±0.03% FSO
Hysteresis <0.03% FSO
Non-Repeatability <±0.01% FSO
Maximum Transverse Load 50% FSO
Transverse Load Effect (at 10% FSO) <±0.03% FSO
Excitation Voltage 10vdc recommended, 15vdc maximum
Input Resistance 440Ω ±20Ω
Output Resistance 350Ω ±2Ω
Insulation Resistance > 500MΩ @ 100vdc
Operating Temperature Range -20 to +70°C
Compensated Temperature Range -10 to +40°C
Zero Temperature Coefficient < ±0.003% FSO/°C
Span Temperature Coefficient < ±0.003% FSO/°C
Environmental Protection Level IP20
Natural Frequency 1kg              2kg             5kg             10kg              25kg              50kg
220Hz         500Hz        750Hz        1kHz              1.5kHz            2kHz
Weight (load cell only) 0.3kg

Dimensions

sta-7 drawing

Downloads

Click here to download - STA-7 Datasheet

Suggested Instrumentation

TR150 Battery Powered Handheld Portable Indicator

SGA Strain Gauge Analogue Amplifier

LCA15 Intelligent Strain Gauge Amplifier/Controller

ADW15 Panel Mounting Load Cell Indicator/Controller

SMW Wall Mounting Load Cell Indicator/Controller

Options

There are currently no options available to view from this page. To view the various options which may be available for the STA-7, please view the STA-7 product datasheet by clicking here.

Applications

  • Hanging scales
  • Material test machines
  • Motor dynamometers
  • General force measurement
Back to ListingPrevious

Copyright © 2014 LCM Systems
Unit 15, Newport Business Park, Barry Way, Newport Isle of Wight, PO30 5GY United Kingdom VAT no (GB 785 3956 71) and Co. Reg (2057541).

Powered By Intergage