350kN load pin, designed for measuring towing forces on military vehicles. With built in signal conditioning.

150te D Type Submersible D Type Shackle Load Cell, manufactured using a GN Rope H11 shackle as the basis for the design.

Wide Body Bow Shackle Load Cell rated at 250te. Designed to be used as part of a two point weighing system or to be used as individual load cells for general lift and weigh applications.

Submersible Shackle Load Cell rated at 85te. Designed for full permanent submersion in sea water to a maximum depth of 45 metres. Used to monitor cable tension on a cable laying barge.

2te Bow shackle Load Cell, using a Crosby G2130 shackle. With RS485 digital output, with ASCII protocol. Complete with integral connector.

Tonsberg Mooring Link Load Cell rated at 85te. A wireless load cell, which is a hybrid between a link and shackle load cell. Used for mooring tension on fishing boats.

550te Compression Load Cell, with sub-sea connector, mating cable assy and mounting base. Suitable for submsersion.

200te Compression Load Cell. Constructed entirely from stainless steel. Deigned for direct mounting onto an Enerpac cylinder.