RCA15 Rack Mounted Intelligent Strain Gauge Amplifier
- Selectable Strain Gauge sensitivity from 0.5 to 200mV/V
- Simple one pass auto calibration
- Auto Tare
- Isolated analogue outputs 4-20mA and 0-10V outputs
- 10V @ 1.4A excitation for each rack
- High accuracy/low drift
- 2 set points/relays per amplifier
- A choice of power supplies
- 3U 19" rack frame
- 10 year data retention
- Digital programming, calibration & display
- Communications -20mA, RS485, RS232 per channel
|
The intelligent Strain Gauge amplifier offers both 4 to 20mA and 0 to 10 volt analogue outputs, from any standard Strain Gauge input. Ease of calibration and setting of the analogue output range, make the modules extremely user friendly; being set up by a simple hand held plug in programmer or an on board programmer/display.
Auto Tare and Peak Hold (if set) on the analogue output are operated via volt free contact closures.
Output options include:
Relay Set Points, programmed in engineering units, with In Flight compensation and Hysterisis Settings available for control or alarm purposes.
Communications
To read any value, change set points or any other parameter via:
- 20mA Current loop (RC1)
- RS232/RS485 (RC3) Formats MANTRABUS, ASCII, MODBUS RTU
- Printer Activated by a contact closure, displays the current live value, with header message, engineering units, auto incrementing batch number and a real time if required.
|
