The LCM range of CBR compression bending ring load cells have been specifically designed for vessel/silo weighing and weighbridge applications, where low height is essential, without compromising on accuracy.
The CBR offers superb performance with regards to accuracy and environmental protection. The stainless steel design and fully welded assembly offers protection levels to IP68.
There are various mounting assemblies available for the CBR, enabling customers the opportunity to install the CBR quickly and realise the best accuracy and performance from the product.
The CBR can also be supplied with a complete instrumentation system, giving the customer a single source for their complete system. Contact our technical department to discuss your instrumentation and control requirements.
- 1000ohm bridge resistance
- Ranges 5000, 10000, 20000, 30000kg
- Rationalised output
- Sealed to IP68
- Silo/vessel mounting assembly option available
- Small size and low profile
- Stainless steel fully welded construction
|Rated Load (kg)||5,000, 10,000, 20,000, 30,000|
|Proof Load||150% of Rated Load|
|Ultimate Breaking Load||>300% of Rated Load|
|Output||2 mV/V at Rated Load (±0.1)|
|Accuracy||< ±0.02% of Rated Load|
|Non-Repeatability||< ±0.01% of Rated Load|
|Excitation Voltage||10vdc recommended, 20vdc maximum|
|Insulation Resistance||>500M? @ 100vdc|
|Operating Temperature Range||-30 to +70°C|
|Compensated Temperature Range||-10 to +40°C|
|Zero Temperature Coefficient||< ±0.002% of Rated Load/°C|
|Span Temperature Coefficient||< ±0.002% of Rated Load/°C|
|Environmental Protection Level||IP68|
PUR screened cable Length 5m (5000kg)
10m (10000 & 20000kg) 20m (30000kg)
|Options Available||Vessel/Silo mounting assembly|
To view the various options which may be available for the CBR, please view the CBR product datasheet by clicking here.
- Vessel Weighing
- Silo Weighing
- Centre of gravity weighing systems
- Multi point structure weighing
- Test machine/press calibration